Spiral Hose Marker

Description: Spiral hydraulic hose marking, makes it easy to identify hydraulic hoses and connect them to equipment with hydraulic hoses. Spiral Hose marker can be used on any hydraulic hose or pipes, fits 1/4 “to 1-1/4” hose | diameter 15mm to 44mm. Contains 2 Spiral Hose markers with printed PLUS and MINUS.   Spiral Hose marker is easy to install and can be reused again. Attach one end and loop-twist the spiral around the hose. Each colour with print PLUS and MINUS symbols has different lengths so they are easier to tell the difference. Fits hoses from 1/4 inches and up, some 1/4 inch hoses can be fitted with a cable tie if the Spiral slides down. Spiral hose marking is available with 9 different colour codes marked with signs, numbers and symbols for easy identification.

• All colours are available with print + & – and are made with laser for easier indication the hoses or pipes.
• Spiral marking can withstand temperatures from -50C to 100C degrees.
• Spiral hose marking is made of polyethylene. Colour coding is done in the casting process so that it is the same unit so that it does not fade or crack.
• The spiral hose marking is very robust and is not affected by grease, oil or dirt; it can be cleaned with solvent or soap.
• Easy to assemble, no tools required. Easy to change to suit the operator.